home
***
CD-ROM
|
disk
|
FTP
|
other
***
search
/
MacHome 1999 September
/
MacHome CD-ROM 09-1999.toast
/
Apple Updates
/
Mac OS 8.6 Update
/
Update Install Pieces
/
Software Installers
/
Upgrader Files
/
Apple Software Restore
/
Apple Software Restore.rsrc
/
STR#_9999.txt
< prev
next >
Wrap
Text File
|
1999-03-18
|
3KB
|
87 lines
This operation will erase the device “^0” and put “^1” onto it. Proceed?
The device restore failed.
Could not load UDIF driver.
Could not load file type for the HDI driver.
This software requires System 8.1 to run. Please upgrade and try again.
Some necessary checksums are missing in configuration “^1”.
Unable to adjust the volume geometry for the volume “^0”.
Unable to retrieve the text encoding for the configuration “^1”.
The given source is not a valid image file.
Are you sure you want to quit the restore operation?
Unwanted files could not be removed.
The volume information could not be copied.
The alternate MDB could not be written.
There was a problem running an Image Post-load Action.
There was a problem running an Image Pre-load Action.
Some applications could not be quit.
An old version of the HDI Driver is present and could not be updated. There are probably images mounted.
Could not load the HDI Driver.
This software has expired. Please get a newer version. Mahalo.
There are no volumes to restore onto.
Cannot find any configurations to restore.
There was a problem calculating the checksum of the configuration “^1” on the volume “^0.” You may want to try again.
There was a problem creating the target folder “^2” on the volume “^0.”
There was a problem running a Factory Post-load Action.
There was a problem running a Bundle Post-load Action.
There was a problem running a Bundle Pre-load Action.
There was a problem running a Factory Pre-load Action.
There was an unexpected Folder Manager error looking for the System Folder on your startup disk.
Restoring onto your startup disk is not supported.
There was a problem renaming the volume “^0” to “^1.”
There was a problem rebuilding the desktop on volume “^0.”
There are no files in configuration “^1” to restore onto volume “^0.”
This software requires System 7.0 to run. Please upgrade and try again.
Unable to write boot blocks to volume “^0.”
Unable to bless the System Folder on volume “^0.”
The software configuration “^1” appears to be damaged.
Unable to move files on volume “^0” to safety.
Restoring the software configuration “^1” to volume “^0” failed.
Unable to erase volume “^0.”
Unable to close files on volume “^0.”
Not enough memory to initialize variables.
There is not enough space on volume “^0” to restore “^1.”
This operation will erase the volume “^0” and put “^1” onto it. It will take ^2 ^3. Proceed?